VELA Tango 200

Back to - VELA Chairs | VELA Teenager and adult chairs

This is a customised chair which comes with a larger seat and higher backrest with extra lumbar support in comparison to the VELA Tango 100 model:

Provides the user with an extra degree of safety and stability when performing everyday activities

Allows the user can "walk" the chair forward providing vital mobility and independence, allowing the user to “get around” without assistance

Comes with a ‘CY’ seat as standard (B:47 x L:49 cm) and a ‘CY’ backrest (B:43 x L:45 cm)

Product information

- Product Sheet

- User Manual

VELA Tango 200 accessories

Arthrodesis Coxit Seat CX
Arthrodesis Coxit Seat CX (W:46xD:46 cm). Large arthrodesis seat with greater width and depth. The seat has adjustable panels at the front, which can be adjusted steplessly and independently of each other. It is suitable for people with stiff joints, amputated legs or those who have had hip operations and where an open hip angle for one or both legs is required.

Arthrodesis Coxit seat X
Arthrodesis Coxit seat X (W:44xD:44 cm). A standard size seat with adjustable panels at the front which can be adjusted steplessly and independently of each other. It is suitable for people with stiff joints, amputated legs or those who have had hip operations and where an open hip angle for one or both legs is required.

CY seat
CY seat (W:47xD:49 cm). Ergonomically shaped, padded seat with rounded front edge. This is a comfortable seat which makes it possible to achieve an active sitting posture with support and comfort for the user without the seat cutting off the blood flow to the legs.

Ergo seat
Ergo seat (W:46xD:40 cm). An ergonomically designed seat with rounded front edge and shallower seat depth than a standard seat. This seat is particularly suitable for users with short legs and who need a wide seat.

KP-seat
KP seat (W:39xD:36 cm). A narrow, flat padded seat with shallow seat depth, suited to users who want a flatter seat. Suitable for short users as well as children.

KX-seat
KX seat (W:39xD:44 cm). A narrow, flat padded seat, suited to tall users who want a flat seat.

LP-seat
LP seat (W:44xD:36 cm). An ergonomically designed seat with rounded front edge and shallow seat depth. The seat is suited to users who want an active sitting posture, for example with forward tilt-in-space function and, at the same time, good support for the thigh bones.

XX seat
The XX-seat (W: 49xD: 46 cm) is a wide padded seat with a rounded front. The seat depth creates a good and supportive seating comfort for the user, while the shape of the seat ensures a good blood flow to the legs.

Y-seat
Y seat (W:44xD:44cm) with strong, padded seat cushion. The shape of the seat, with contours at the back, gives the user optimum support and good sitting comfort. The seat has a rounded front edge, to ensure a good blood supply to the legs.

CX-Backrest
CX backrest (W:38xH43 cm). A high backrest with flat shape. The angle of the back can be adjusted and locked at a fixed angle, for optimal lumber support.

CY backrest with air cushion
CY backrest (W:43xH:45 cm) with air cushion for lumbar support. The backrest has a high back with rounded top edge. The integrated air cushion in the lumbar area makes it possible to change the degree of lumbar support. The air cushion is suitable for use where lumbar support needs to be altered during the course of the day.

CY-backrest
CY backrest (W:43xH:45 cm). A high backrest with lumbar support and a rounded top edge. The backrest has a sliding bolt, which makes it possible to lock the backrest at a fixed angle to achieve good lumbar support.

D3-Backrest
D3 backrest (W:28xH:23cm). An ergonomically shaped backrest, with height and depth adjustment. The D3 backrest is useful for smaller people who require good back support.

Ergo Backrest
The Ergo backrest (W:38xH:22 cm) is an ergonomic curved backrest, which provides good lumbar support. The backrest is low, which allows the user free movement of the back, shoulders and arms for various activities.

LP-backrest
LP backrest (W:26xH:16 cm). A narrow, ergonomically shaped backrest with precise adjustment options. Affords support for a small area of the back.

Y backrest
Y backrest (W:37xH:30 cm). An ergonomic, curved backrest with good padding, which provides good, flexible lumbar support. The Y backrest is a low backrest, which allows for free movement of the back, shoulders and arms for various activities.

Loose seat cover. The cover is breathable, hygienic and washable, and can easily be removed and washed in the washing machine. It is available in several colours and types of fabric.

Loose cover for backrest
Loose cover for backrest. The cover is hygienic, washable and can easily be removed and washed in the washing machine. It is available in fabric or waterproof plastic.

Loose seat cover in waterproof terry cloth
Loose seat cover in waterproof terry cloth. This cover is suitable for users who spill a lot at mealtimes and those who suffer from incontinence. The cover is breathable, hygienic and washable, and can easily be removed and washed in the washing machine.

Ergon armrest - 7x35 cm
Ergon armrest (W:7xL:35 cm) and armrest bar (31 cm). A standard armrest bar with long, narrow, almost rectangular pad.

Ergon armrest - 8x26cm
Ergon armrest (W:8xL:26 cm) and armrest bar (31 cm). A standard armrest bar with short, rounded, narrow pad.

Ergon armrest - 9x30 cm - extra long
Ergon armrests (W:9xL:30 cm) with extra long armrest bar (41 cm) are useful for tall users who require good support from the armrests when getting into or out of the chair. They are also beneficial for users with a long upper body combined with short arms, e.g. users with dwarfism.

Ergon armrest with hemiplegic pad
Ergon armrest with hemiplegic pad and ball-and-socket joint (available in two lengths: W:15xL:30 cm and W:15xL:40 cm) and armrest bar (31 cm). The ball-and-socket joint allows for stepless adjustment of the armrest pad in all directions and angles. This is useful where the armrest needs to be placed in front of the body, e.g. users with hemiplegia.

Fold-down armrest with pad (W:9xL:25 cm)
Fold-down armrest with pad (W:9xL:25 cm) and armrest bar 18 cm. The armrest is easily folded down, e.g. for sideways transfer, or help with getting dressed. The height and lateral position of the armrest can be adjusted to provide support and relief when the user moves to and from the chair. The short armrest pad makes it possible for the user to get close to the table.

Fold-down armrest with pad (W:9xL:25 cm) Long
Fold-down armrest with pad (W:9xL:25 cm) and armrest bar 31 cm. The armrest with extra height is suitable for tall users who need good support from the armrests, for example, when getting up and sitting down, or for users with a long upper body and short arms, for example users with dwarfism. The armrest is easily folded down, e.g. for sideways transfer, or help with getting dressed. The height and lateral position of the armrests can be adjusted. The short armrest pad makes it possible for the user to get close to the table.

4-wheel brake
A 4-wheel brake frame is suitable for users who are very restless, or if the chair is standing on an uneven surface. The frame ensures optimal braking on all four wheels, even if the chair is on an uneven surface.

Brake pedal
The brake pedal can be used instead of a brake lever or together with a brake lever. The brake pedal is located on the back of the chair and is foot-operated. The pedal is an advantage if a standing person has to brake the chair without unnecessary bending or compromising postures. A brake pedal can be an advantage when using a push handle.

Extension to the brake stick
An extension to the brake stick is an advantage for the user in a high sitting position or where the user has difficulties reaching a standard length brake stick.

T-brake grip
The T-brake lever extends the brake lever, making it easier for people with disabilities, e.g. in the shoulders, to reach the brake.

Wider front castors
Front castors (100 mm) with 3,1cm wide lanes are suitable when VELA Tango chair is used e.g. on a tile floor, floor with large joints or uneven floor. Due to the wide castors, the chair can run easier when you push the chair forwards or move around in the chair e.g. on narrow joints in the tile floor.

Amputation support
Amputation support for users with amputated legs. Padded cushion (W:15.5 x L:25 x D:5 cm), which can be angled and adjusted in relation to the distance from the seat. The cushion is soft and comfortable.

E-footrest with 67 degree fixed angle (s)
E-footrest with 67 degree fixed angle and swivelling, fold-up footplate (37.5 cm) and adjustable length (32-48 cm). This is useful for getting into and out of the chair as the footplates can be folded up and the leg rests can be easily swivelled to the side and removed without the need for tools.

Fold-out foot bar
Fold-out foot bar which can be folded up so that it is not in the way when the user gets into and out of the chair. This foot bar is useful for achieving a good sitting posture and, at the same time, resting the feet when a high sitting position is required.

S footrest 20 degrees with fold-out LP plate
S footrest with fold-out LP plastic plate. The S footrest is fitted to the seat, and travels with the seat when it is height-adjusted, giving the user good support for the feet.
Available in two sizes with 20 degree angle:
W:283xD:275 mm with adjustable length 26-41 cm
W:283xD:245 mm with adjustable length 21-31 cm

S footrest with fold-out LP plastic plate
S footrest with fold-out LP plastic plate. The S footrest is fitted to the seat, and travels with the seat when it is height-adjusted, giving the user good support for the feet.
The LP plate is available in 3 sizes:
LP.20 plate - size 283x245 mm
LP.25 plate - size 335x250 mm
LP.27 plate - size 283x275 mm
The desired LP plate can be mounted on two different lengths:
Base with adjustable length 21-31 cm
Base with adjustable length 26-41 cm
LP plate and base are chosen taking into account the user's measures and needs

S footrest with S-plate
S footrest with 20 degree angle and fold-out plastic plate. The S footrest is fitted to the seat, and travels with the seat when it is height-adjusted, giving the user good support for the feet.
Available in two sizes:
W:296xD:225 mm with adjustable length 26-41 cm
W:296xD:225 mm with adjustable length 21-31 cm

Head support
Head support with leather pad (W:26xH:13 cm). The head support has stepless adjustment for height, angle and lateral position. It can be fitted only on high backrests such as the CY backrest and CX backrest.

Head support with deep ES cushion, (W:25xH:12 cm)
Head support with deep ES cushion, (W:25xH:12 cm), with soft, black Savanna leather. The height and angle of the head support can be adjusted, and it can be moved forwards and backwards, and easily removed without the need for tools. The head support can be fitted on the high backrests ES3 and T3 only, and is required when the tilt-in-space function of the chair is activated for resting.

Y seat belt
The Y seat belt is a 4-point lap belt with adjustable length. The seat belt is available with either a press lock or a binding lock. The seat belt can be removed and washed in the washing machine. Can be mounted with harness over the thigh or stomach.
Available in three sizes:
Small: W:3.8xL:128 cm
Medium W:3.8xL:138 cm
Large W:3.8xL:172 cm

Table
Table in acrylic with shallow lip. The table folds down and can be removed, and its height, depth and width adjusted to match the user’s sitting position. NB: The table rests on both armrests when fitted to the chair.
Available in three sizes:
W:39xD:29 cm
W:52xD:40 cm
W:60xD:49 cm

Height and depth-adjustable push bar
Height and depth-adjustable push bar, which takes account of the carer’s work posture when having to transport a user in the chair over short distances. The height, depth and angle of the push bar can be easily adjusted to suit the person pushing the chair. Some users may also benefit from supporting themselves on a push bar when they walk around. The push bar is easy to remove.

Arthritis grip
The Arthritis grip can make it easier to operate height adjustment and tilt if, for example, you have reduced strength or mobility in the hands and arms.

Anti-tip bar
The anti-tip bar provides the chair with extra stability, which is useful when the chair is used for cycling exercises or for users with violent movements. The bar is fitted behind the chair and ensures that the chair cannot tip over backwards.

Lateral support - large, curved PU cushion
Lateral support with large, curved PU cushion (W:9xL:17 cm). This lateral support is suitable for users who require stability and support. The height, depth and width of the support can be adjusted. The lateral support can also swivel to the side to allow for transfer, and be fitted on various lateral support bars to fit the width of the body. These lateral supports can be used only in connection with high backrests. Available with different types of covers.

Lateral support - padded cushion
The lateral support with padded cushion (W:17xL:10cm). This lateral support is suitable for users who require stability and support. The height, depth and width of the support can be adjusted. The lateral support can also swivel to the side to allow for transfer, and be fitted on various lateral support bars to fit the width of the body. These lateral supports can be used only on high backrests. Available with different types of covers.

Lateral support - small, curved PU cushion
Lateral support with small, curved PU cushion (W:6xL:17 cm). This lateral support is suitable for users who require stability and support. The height, depth and width of the support can be adjusted. The lateral support can also swivel to the side to allow for transfer, and be fitted on various lateral support bars to fit the width of the body. These lateral supports can be used only on high backrests. Available with different types of covers.